Ana içeriğe geç

Giriş

This guide details how to replace the flash bulb of this camera.

Parçalar

Hiçbir parça belirtilmedi.

  1. Canon EOS Rebel T4i Flash Replacement, Battery: adım 1, 1 resimden 1.
    • Locate the battery cover at the bottom of the camera.

    • Pull down on the black tab to open the cover.

  2. Canon EOS Rebel T4i Flash Replacement: adım 2, 1 resimden 1.
    • Push the grey tab on the right side of the battery.

    • Remove the battery from the slot.

  3. Canon EOS Rebel T4i Flash Replacement, Flash: adım 3, 1 resimden 1.
    • Using the Phillips screwdriver, unscrew the two 4.9mm Phillips head screws which are located underneath the flash.

  4. Canon EOS Rebel T4i Flash Replacement: adım 4, 1 resimden 1.
    • Remove the covering.

  5. Canon EOS Rebel T4i Flash Replacement: adım 5, 1 resimden 1.
    • Use the tweezers to remove the excess glue around the wiring. This will allow you to cut the wire and remove the light in the next step.

  6. Canon EOS Rebel T4i Flash Replacement: adım 6, 1 resimden 1.
    • Use the wire cutters to cut the wiring connected to the flash.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 farklı kişi bu kılavuzu tamamladı.

Jordan Rabold

Üyelik tarihi: 14-04-2014

750 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 12-33, Maness Spring 2014 Cal Poly, Team 12-33, Maness Spring 2014 üyesi

CPSU-MANESS-S14S12G33

4 Üyeler

13 adet Kılavuz yazıldı

3 Yorum

how do you reverse step 6 - cutting the wires?

jeremyyoung - Yanıt

You dont tell how to make sure capacitors are discharged before changing the flash ? and do you know what is the replacement number of the flash bulb itself ?

jackqc09 - Yanıt

No parts required? So I can repair my flash not having to buy a new bulb? haha Please, I need the link from where I repair my burned built-in flash :/

gustavoaleme - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 33

Her zaman: 3,815