Ana içeriğe geç

Giriş

Removing the memory card before performing any maintenance ensures that the memory card will not become damaged and loss of data is avoided.

Aletler

Parçalar

Hiçbir parça belirtilmedi.

  1. Place the camera on its side with the soft touch grip facing up and the top of the camera facing right.
    • Place the camera on its side with the soft touch grip facing up and the top of the camera facing right.

  2. Slide the memory card door in the direction of the arrow engraved on the camera.
    • Slide the memory card door in the direction of the arrow engraved on the camera.

    • Once the door has slid open to its full position, lift up on the door.

  3. With the door open, push down the small black plunger next to the CF slot. The CF card will disengage from the slot and be ejected far enough that you can grasp it between thumb and forefinger and remove it from the slot.
    • With the door open, push down the small black plunger next to the CF slot. The CF card will disengage from the slot and be ejected far enough that you can grasp it between thumb and forefinger and remove it from the slot.

    • The plunger will stay in its depressed position until a CF card is again inserted in the slot.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nicholas Abate

Üyelik tarihi: 28-08-2015

647 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 8-6, Eyestone Fall 2015 USF Tampa, Team 8-6, Eyestone Fall 2015 üyesi

USFT-EYESTONE-F15S8G6

3 Üyeler

18 adet Kılavuz yazıldı

Bir Yorum

My camara wont read memory card

mcbed215 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 5

Son 30 gün: 23

Her zaman: 2,763