Ana içeriğe geç

Giriş

If your printed documents or images are becoming distorted due to a dysfunctional printhead, use this guide to replace the printhead.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

Hiçbir parça belirtilmedi.

  1. Press the power button to turn on the printer.
    • Press the power button to turn on the printer.

  2. Pull down the front output tray cover.
    • Pull down the front output tray cover.

  3. Lift the printer lid.
    • Lift the printer lid.

  4. PC Laptop Batteries

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Hemen Alışveriş Yapın

    PC Laptop Batteries

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Hemen Alışveriş Yapın
  5. Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.
    • Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.

  6. Push in the white clip to release the ink cartridge from the printhead. Lift the ink cartridge from the printhead.
    • Push in the white clip to release the ink cartridge from the printhead.

    • Lift the ink cartridge from the printhead.

    • Repeat this process for the remaining ink cartridges.

    • You have successfully removed all ink cartridges.

  7. After removing all ink cartridges, lift the printhead lock lever.
    • After removing all ink cartridges, lift the printhead lock lever.

  8. Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.
    • Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.

  9. You have successfully removed your printhead.
    • You have successfully removed your printhead.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Caitlyn

Üyelik tarihi: 07-10-2014

707 İtibar

4 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-3, Leahy Fall 2014 USF Tampa, Team 1-3, Leahy Fall 2014 üyesi

USFT-LEAHY-F14S1G3

3 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

fairly helpful, especially the photo's. but I need advice on how to clean the printhead before trying to replace it,

a1halber - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 Gün: 10

Son 30 Gün: 41

Her zaman: 4,545