Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera. Remove batteries.
  • Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.

  • Remove batteries.

Yorum Ekle

Remove the three indicated .2mm screws using a Philips #00 screwdriver. Gently pull off side-panel to remove it.
  • Remove the three indicated .2mm screws using a Philips #00 screwdriver.

  • Gently pull off side-panel to remove it.

Yorum Ekle

Remove the two indicated .2mm screws using a Philips #00 screwdriver.
  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Yorum Ekle

Remove the indicated .2mm screw using a Philips #00 screwdriver. Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.
  • Remove the indicated .2mm screw using a Philips #00 screwdriver.

  • Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.

Yorum Ekle

Open 'DIGITAL A/V OUT' door on camera. Remove the two indicated .2mm screws using a Philips #00 screwdriver.
  • Open 'DIGITAL A/V OUT' door on camera.

  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Yorum Ekle

Grip the sides of the top panel and gently pull to separate the top panel from the camera body.
  • Grip the sides of the top panel and gently pull to separate the top panel from the camera body.

  • The top panel will not completely detach.

Yorum Ekle

Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels. Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.
  • Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.

  • Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

Yorum Ekle

Use the spudger to gently pull back the retaining clip and pull the ribbon out. The top panel should now be completely detached from the camera.
  • Use the spudger to gently pull back the retaining clip and pull the ribbon out.

  • The top panel should now be completely detached from the camera.

  • Applying too much force to the spudger may damage the retaining clip.

FAIL… slide the black element under the ribbon.

marekzy - Yanıt

Remove .2 mm screw using a #00 Philips screwdriver. Gently pry off back panel to remove it.
  • Remove .2 mm screw using a #00 Philips screwdriver.

  • Gently pry off back panel to remove it.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Alicia Burns

Üyelik tarihi: 13-10-2014

552 İtibar

5 adet Kılavuz yazıldı

Takım

Clemson, Team 2-5, Benson Fall 2014 Clemson, Team 2-5, Benson Fall 2014 üyesi

CLEM-BENSON-F14S2G5

4 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 7

Son 30 Gün: 11

Tüm Zamanlar: 571