Eşyalarını Tamir Et Topluluk Mağaza

Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement

Giriş

If you’re experiencing problems with your camera turning on or the camera taking photos, consider replacing the power/shutter button panel in your camera. This guide will show you how to replace your damaged power button.

Neye ihtiyacın var

  1. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement, Power/Shutter Button Panel: adım 1, 2 resimden 1. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement, Power/Shutter Button Panel: adım 1, 2 resimden 2.

    • On the top-center of your device, turn off the camera by pressing the power button.

    • Put your finger on the battery door and slide the battery door to the right to open it.

    • Push the release button downward and it will release the battery.

    Düzenle

  2. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 2, 1 resimden 1.

    • Use the Phillips #00 screwdriver to remove the screws.

    Düzenle

  3. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 3, 1 resimden 1.

    • Remove the two 4.0mm screws on the bottom of the camera located near the battery door using a Phillips #00 screwdriver.

    Düzenle

  5. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 4, 1 resimden 1.

    • At the bottom of the camera next to the battery door, remove two more screws using the Phillips #00 screwdriver.

    Düzenle

  6. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 5, 1 resimden 1.

    • To remove the back portion of the camera case, use your fingers to carefully pry the case apart at the seam.

    Düzenle

  7. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 6, 2 resimden 1. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 6, 2 resimden 2.

    • On the motherboard there should be a white port. Using the spudger, disconnect it from the motherboard.

    Düzenle

  8. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 7, 1 resimden 1.

    • Follow the green and white wire. There is a gray piece of rubber holding the button into place. Remove it with the spudger.

    Düzenle

  9. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: adım 8, 1 resimden 1.

    • Lift the panel off from the top of the camera with your hands.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Michelle Ngo

Üyelik tarihi: 07/23/19

595 İtibar

3 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UW Tacoma, Team S1-G3, Liner Summer 2019 UW Tacoma, Team S1-G3, Liner Summer 2019 üyesi

UWT-LINER-SU19S1G3

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 295