Eşyalarını Tamir Et Topluluk Mağaza

Canon PowerShot SD1000 LCD Screen Replacement

Neye ihtiyacın var

  1. Canon PowerShot SD1000 LCD Screen Replacement, Back Panel: adım 1, 2 resimden 1. Canon PowerShot SD1000 LCD Screen Replacement, Back Panel: adım 1, 2 resimden 2.

    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

    Düzenle

  2. Canon PowerShot SD1000 LCD Screen Replacement: adım 2, 1 resimden 1.

    • Remove the two 2.9 mm screws from the camera bottom panel.

    Düzenle

  3. Canon PowerShot SD1000 LCD Screen Replacement: adım 3, 1 resimden 1.

    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

    Düzenle

  4. Canon PowerShot SD1000 LCD Screen Replacement: adım 4, 1 resimden 1.

    • Pull the back panel away from the camera body, starting at the end with the function buttons.

    Düzenle

  6. Canon PowerShot SD1000 LCD Screen Replacement: adım 5, 1 resimden 1.

    • Remove the small cover panel and the attached wrist strap mount.

    Düzenle

  7. Canon PowerShot SD1000 LCD Screen Replacement, Front Case: adım 6, 1 resimden 1.

    • Remove the front cover by gently pulling it away from the camera body.

    Düzenle

  8. Canon PowerShot SD1000 LCD Screen Replacement: adım 7, 1 resimden 1.

    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

    Düzenle

  9. Canon PowerShot SD1000 LCD Screen Replacement, LCD Screen: adım 8, 1 resimden 1.

    • Remove the two 2.4 mm screws located at the top of the LCD panel.

    Düzenle

  10. Canon PowerShot SD1000 LCD Screen Replacement: adım 9, 2 resimden 1. Canon PowerShot SD1000 LCD Screen Replacement: adım 9, 2 resimden 2.

    • Pull up the metal frame surrounding the LCD screen starting at the side of the camera.

    Düzenle

  11. Canon PowerShot SD1000 LCD Screen Replacement: adım 10, 1 resimden 1.

    • Push the metal frame away from the metal tab using the spudger to detach the frame.

    • Rotate the metal frame upwards.

    • The metal framing should be attached by a metal tab towards the bottom of the camera, near the function buttons.

    Düzenle

  12. Canon PowerShot SD1000 LCD Screen Replacement: adım 11, 2 resimden 1. Canon PowerShot SD1000 LCD Screen Replacement: adım 11, 2 resimden 2.

    • Carefully lift the metal frame from the camera.

    • Remove the black LCD screen, leaving the thin lens pieces in place.

    • BE CAREFUL; both components are attached by an orange connector ribbon and cannot be removed yet.

    Düzenle

  13. Canon PowerShot SD1000 LCD Screen Replacement: adım 12, 3 resimden 1. Canon PowerShot SD1000 LCD Screen Replacement: adım 12, 3 resimden 2. Canon PowerShot SD1000 LCD Screen Replacement: adım 12, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Carefully pull on the orange connector ribbon to disconnect the LCD screen.

    • The LCD screen can be pulled out of the frame before disconnecting its connector ribbon.

    • Tweezers are helpful to disconnect the ribbon.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

8 tane daha katılımcı ile

Phillip Phung

Üyelik tarihi: 01/19/12

651 İtibar

9 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

Cal Poly, Team 8-18, Maness Winter 2012 Cal Poly, Team 8-18, Maness Winter 2012 üyesi

CPSU-MANESS-W12S8G18

4 Üyeler

12 adet Kılavuz yazıldı

1Rehber Yorum

Very helpful. These units still sell for a lot more than the cost of the replacement LCD

George Francis - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 22

Son 30 gün: 91

Her zaman: 4,029