Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the two screws from the side panel closest to the camera lens.
    • Remove the two screws from the side panel closest to the camera lens.

    • Note: These screws are 2.9 mm long.

    Yorum Ekle

  2. Remove the two screws from the camera bottom panel.
    • Remove the two screws from the camera bottom panel.

    • Note: These screws are 2.9 mm long.

    Yorum Ekle

    • Remove the 2 screws from the side panel farthest from the lens.

    • Note: These screws are 2.9 mm long.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

    Yorum Ekle

    • Remove the small cover panel and attached wrist strap mount.

    Yorum Ekle

    • Remove the front cover by gently pulling it away from the camera body.

    Yorum Ekle

    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

    Yorum Ekle

    • Using the spudger, take off the shutter button by prying the small tab on the front side of the camera.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Üyelik tarihi: 19-01-2012

486 İtibar

9 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-18, Maness Winter 2012 Cal Poly, Team 8-18, Maness Winter 2012 üyesi

CPSU-MANESS-W12S8G18

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 891