Eşyalarını Tamir Et Topluluk Mağaza

Canon PowerShot SD1200 IS Front and Rear Covers Replacement

Giriş

Use this guide to replace the front and back covers of the Canon PowerShot SD1200 IS camera or to access damaged internal components.

Neye ihtiyacın var

  1. Canon PowerShot SD1200 IS Front and Rear Covers Replacement, Front and Rear Covers: adım 1, 1 resimden 1.

    • Remove the battery.

    Düzenle

  3. Canon PowerShot SD1200 IS Front and Rear Covers Replacement: adım 2, 3 resimden 1. Canon PowerShot SD1200 IS Front and Rear Covers Replacement: adım 2, 3 resimden 2. Canon PowerShot SD1200 IS Front and Rear Covers Replacement: adım 2, 3 resimden 3.

    • Remove the two screws from the side of the camera casing with the strap. (4mm Phillips 00)

    • Remove the two screws from the bottom of the camera. (4mm Phillips 00)

    • Remove the two screws from the right side of the camera opposite the strap. (2mm Phillips 00)

    Düzenle

  4. Canon PowerShot SD1200 IS Front and Rear Covers Replacement: adım 3, 2 resimden 1. Canon PowerShot SD1200 IS Front and Rear Covers Replacement: adım 3, 2 resimden 2.

    • Pull off the front cover.

    • If the top of the cover sticks, use gentle downward pressure on the retention clips above the lens to release.

    • Remove the back cover.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Jeff Casper

Üyelik tarihi: 09/15/16

848 İtibar

7 adet Kılavuz yazıldı

Rozetler: 18

+15 tane daha rozet

Ekip

USF Tampa, Team 17-5, Blackwell Fall 2016 USF Tampa, Team 17-5, Blackwell Fall 2016 üyesi

USFT-BLACKWELL-F16S17G5

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 9

Son 30 gün: 24

Her zaman: 899