Giriş
This guide is required in order to replace any other component that needs replacing. You cannot access any other component if the front cover is attached.
Neye ihtiyacın var
-
-
Remove the two 2mm black screws that are located on the underside of the camera.
-
Remove the two 3mm silver screws from the right side of camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
University of North Texas, Team S5-G3, Thompson Fall 2018 University of North Texas, Team S5-G3, Thompson Fall 2018 üyesi
UNT-THOMPSON-F18S5G3
4 Üyeler
5 adet Kılavuz yazıldı
