Giriş
If you experience the E18 error, go to this site and try their solutions.
If you still experience the error, you can follow this guide to disassemble the camera and manually clean the inside of the camera and the lens.
Neye ihtiyacın var
-
-
-
Turn off the camera by pressing the power button above the LCD screen.
FixBot'a Sor
-
-
-
Remove the two small screws on the bottom of the camera using a Phillips #00 screwdriver.
-
-
-
Use a Phillips #00 screwdriver to remove the two small screws on the right side of the camera.
-
-
-
-
Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out digital label.
-
-
-
Use a Phillips #00 screwdriver to remove the screw on the bottom of the camera near the battery and memory card slots.
-
-
-
Remove the front, back, and side casings from the camera and set to the side.
-
-
-
-
Bu adımda kullanılan alet:Dust Blower$5.99
-
Clean the lens and the area surrounding the lens with a soft brush and dust blower.
-
-
To reassemble your device, follow steps 1-6 instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
Cal Poly, Team 9-71, Walters Spring 2011 Cal Poly, Team 9-71, Walters Spring 2011 üyesi
CPSU-WALTERS-S11S9G71
4 Üyeler
17 adet Kılavuz yazıldı
