Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew 2-4.8mm black screws from the front of the camera using a #0 Phillips screwdriver. Unscrew 2-4.8mm black screws from the side of the camera using a #0 Phillips screwdriver. Unscrew 2-4.8mm black screws from the bottom of the camera using a #0 Phillips screwdriver.
    • Unscrew 2-4.8mm black screws from the front of the camera using a #0 Phillips screwdriver.

    • Unscrew 2-4.8mm black screws from the side of the camera using a #0 Phillips screwdriver.

    • Unscrew 2-4.8mm black screws from the bottom of the camera using a #0 Phillips screwdriver.

  2. Using your hands, gently separate the back panel from the camera. Continue to pull the back panel until it completely detaches from the camera.
    • Using your hands, gently separate the back panel from the camera.

    • Continue to pull the back panel until it completely detaches from the camera.

  3. Use your hands to gently separate the front panel from the camera. Continue to pull the front panel until it completely detaches from the camera.
    • Use your hands to gently separate the front panel from the camera.

    • Continue to pull the front panel until it completely detaches from the camera.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Jamie Secretan

Üyelik tarihi: 11-03-2015

1.885 İtibar

6 adet Kılavuz yazıldı

Takım

Colorado Springs, Team 2-3, Panko Spring 2015 Colorado Springs, Team 2-3, Panko Spring 2015 üyesi

UCCS-PANKO-S15S2G3

3 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

guide is missing removal of several screws. Four silver screws for front cover. I removed a total of 12 screws to remove covers. Guide only shows 6. Also requires disconnection of flex strip attached to front cover, from below wheel

Stewie Wewie - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 18

Her zaman: 1,541