Eşyalarını Tamir Et Topluluk Mağaza

Canon PowerShot SX260 HS Motherboard Replacement

Neye ihtiyacın var

  1. Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: adım 1, 3 resimden 1. Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: adım 1, 3 resimden 2. Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: adım 1, 3 resimden 3.

    • *Be sure to always remove the battery from the camera before disassembling to avoid permanent damage.

    • There are a total of 6 (3mm) external screws that will need to be removed; 2 on the left side, 2 on the bottom, and 2 on the right side.

    • 1.) Remove the 2 screws on the left side

    • 2.) Remove the 2 screws on the bottom of the camera.

    • 3.) Remove the 2 screws on the right side of the camera.

    Düzenle

  2. Canon PowerShot SX260 HS Motherboard Replacement: adım 2, 1 resimden 1.

    • Use spludger tool or small flathead screw driver to gently lift and remove back face plate.

    Düzenle

  3. Canon PowerShot SX260 HS Motherboard Replacement: adım 3, 1 resimden 1.

    • After removing exterior screws, gently lift off the front face plate.

    Düzenle

  4. Canon PowerShot SX260 HS Motherboard Replacement: adım 4, 1 resimden 1.

    • After removing the front faceplate you will find 4 (3mm) screws on the interior.

    • Remove all 4 interior screws.

    Düzenle

  6. Canon PowerShot SX260 HS Motherboard Replacement: adım 5, 1 resimden 1.

    • Remove 1 (6 mm) Screw from the bottom of the silver metal plate. The screw is also silver

    Düzenle

  7. Canon PowerShot SX260 HS Motherboard Replacement: adım 6, 1 resimden 1.

    • With blue spludger tool gently lift the metal plate from the face of the camera.

    • The plate is held by a piece of double sided tape so there will be a bit of resistance.

    Düzenle

  8. Canon PowerShot SX260 HS Motherboard Replacement: adım 7, 1 resimden 1.

    • Remove 3 (3 mm) screws from the top surface of the motherboard.

    • You will notice that there is one on the top, and 2 on the bottom in a triangular shape.

    Düzenle

  9. Canon PowerShot SX260 HS Motherboard Replacement: adım 8, 1 resimden 1.

    • Gently remove the ribbon cable from the top of the motherboard with a pair of tweezers.

    • Be careful during this step not to rip or tear the cable.

    Düzenle

  10. Canon PowerShot SX260 HS Motherboard Replacement: adım 9, 1 resimden 1.

    • Use the blue spludger tool to gently unplug the last ribbon cable that is attached to the motherboard.

    Düzenle

  11. Canon PowerShot SX260 HS Motherboard Replacement: adım 10, 2 resimden 1. Canon PowerShot SX260 HS Motherboard Replacement: adım 10, 2 resimden 2.

    • Remove the motherboard with your fingers.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Tyler Kelch

Üyelik tarihi: 03/05/15

622 İtibar

4 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Sam Houston State, Team 11-8, Blackburne Winter 2015 Sam Houston State, Team 11-8, Blackburne Winter 2015 üyesi

SHSU-BLACKBURNE-W15S11G8

2 Üyeler

4 adet Kılavuz yazıldı

2 Yorum

Where is the internal clock/calendar battery located?

GPa Rocks - Yanıt

Internal clock battery is under circuit board on right side of lens as seen in photo for Step 9. See 2:48 - 3:19 in this video: https://www.youtube.com/watch?v=Awmm6hDm....

Paul Unger - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 19

Her zaman: 2,099