Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen. Remove the 2 screws (4.08 mm) on the other side.  One is located under the rubber USB flap. Remove the last screw (2.59 mm) located on the bottom of the camera.
    • Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.

    • Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.

    • Remove the last screw (2.59 mm) located on the bottom of the camera.

    • Slowly pull the back cover of the camera.

  2. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  3. Unplug the green and white plugs connecting the top panel to the top of the logic board. Dislodge the tab above the lens.
    • Unplug the green and white plugs connecting the top panel to the top of the logic board.

    • Dislodge the tab above the lens.

    • Dislodge the back tab.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Robert Manno

Üyelik tarihi: 05-01-2011

432 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 13-3, Forte Winter 2011 Cal Poly, Team 13-3, Forte Winter 2011 üyesi

CPSU-FORTE-W11S13G3

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 900