Ana içeriğe geç

Capresso Perfectea 260 Motherboard Replacement

Neye ihtiyacın var

  1. Capresso Perfectea 260 Motherboard Replacement, Motherboard: adım 1, 1 resimden 1.
    • First, take the base of the device and flip it over.

  2. Capresso Perfectea 260 Motherboard Replacement: adım 2, 2 resimden 1. Capresso Perfectea 260 Motherboard Replacement: adım 2, 2 resimden 2.
    • Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.

  3. Capresso Perfectea 260 Motherboard Replacement: adım 3, 1 resimden 1.
    • Remove the two 7.5 mm Phillips #2 screws holding in the motherboard

  4. Capresso Perfectea 260 Motherboard Replacement: adım 4, 1 resimden 1.
    • Unplug the wire going into the side of the motherboard

  5. Capresso Perfectea 260 Motherboard Replacement: adım 5, 2 resimden 1. Capresso Perfectea 260 Motherboard Replacement: adım 5, 2 resimden 2.
    • Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.

    • Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.

    • Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard

  6. Capresso Perfectea 260 Motherboard Replacement: adım 6, 1 resimden 1.
    • Lift the motherboard out of the device

Sonuç

To reassemble your device, follow these instructions in reverse order.

Rohin Chander

Üyelik tarihi: 04/14/15

101 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 6-17, Maness Spring 2015 Cal Poly, Team 6-17, Maness Spring 2015 üyesi

CPSU-MANESS-S15S6G17

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 229