Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Casio Cassiopeia E-125 Touch Screen Replacement

Neye ihtiyacın var

  1. Casio Cassiopeia E-125 Touch Screen Replacement, Battery: adım 1, 1 resimden 1.
    • Flip the device over to the back side.

  2. Casio Cassiopeia E-125 Touch Screen Replacement: adım 2, 1 resimden 1.
    • Slide the small switch on the back to "MAIN".

  3. Casio Cassiopeia E-125 Touch Screen Replacement: adım 3, 1 resimden 1.
    • Slide the battery cover downwards.

    • Pull off the battery cover.

  4. Casio Cassiopeia E-125 Touch Screen Replacement: adım 4, 1 resimden 1.
    • Pull the black tab to remove the battery.

  5. Casio Cassiopeia E-125 Touch Screen Replacement, Touch Screen: adım 5, 1 resimden 1.
    • Using the Phillips #00 screwdriver, remove the two screws near the top of the device.

  6. Casio Cassiopeia E-125 Touch Screen Replacement: adım 6, 1 resimden 1.
    • Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.

  7. Casio Cassiopeia E-125 Touch Screen Replacement: adım 7, 1 resimden 1.
    • Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.

  8. Casio Cassiopeia E-125 Touch Screen Replacement: adım 8, 1 resimden 1.
    • Pry the two halves of the case apart with the small flat head screwdriver.

  9. Casio Cassiopeia E-125 Touch Screen Replacement: adım 9, 1 resimden 1.
    • Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.

    • Lay the two halves of the outer case next to the central components as shown.

  10. Casio Cassiopeia E-125 Touch Screen Replacement: adım 10, 1 resimden 1.
    • Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.

  11. Casio Cassiopeia E-125 Touch Screen Replacement: adım 11, 2 resimden 1. Casio Cassiopeia E-125 Touch Screen Replacement: adım 11, 2 resimden 2.
    • Lift the tab on the motherboard and pull out the ribbon cable.

    • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ryan Fernandez

Üyelik tarihi: 04/03/12

47 İtibar

5 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 5-4, Forte Spring 2012 Cal Poly, Team 5-4, Forte Spring 2012 üyesi

CPSU-FORTE-S12S5G4

6 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 13

Her zaman: 989