Giriş

This guide shows how to remove the back case of the camera to replace a damaged back case or access the inner parts of the camera.

Parçalar

Hiçbir parçaya gerek yok.

Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom.
  • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

Yorum Ekle

Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
  • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

Yorum Ekle

Separate the front case from the body of the camera.
  • Separate the front case from the body of the camera.

Yorum Ekle

Separate the back case from the body of the camera.
  • Separate the back case from the body of the camera.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Laura

Üyelik tarihi: 19-04-2012

31 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-45, Regan Spring 2012 Cal Poly, Team 9-45, Regan Spring 2012 üyesi

CPSU-REGAN-S12S9G45

7 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Tüm Zamanlar: 409