Giriş

This guide shows how to remove the LCD screen from the camera. You may have to replace a broken or shattered screen.

Locate 12 screws. Four on the left, four on the right, and four on the bottom.
  • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

Yorum Ekle

Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
  • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

Yorum Ekle

  • Separate the front case from the body of the camera.

Yorum Ekle

  • Separate the back case from the body of the camera.

Yorum Ekle

  • Remove the metal grating located to the right of the LCD screen by inserting the plastic opening tool under the grating and pulling up.

Yorum Ekle

  • Before removing the side metal bracket, first remove the attached strap knob by twisting it off.

  • Then, remove the side metal bracket by inserting the plastic opening tool under the bracket and pulling up.

Yorum Ekle

  • Using the plastic opening tool, pry up the LCD screen starting at one of the corners. Insert the tool under one of the corners and lift up.

Yorum Ekle

  • Continue to lift the LCD screen all the way up.

  • Be careful not to rip any wires connecting the LCD screen to the top of the camera.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Laura

Üyelik tarihi: 19-04-2012

31 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-45, Regan Spring 2012 Cal Poly, Team 9-45, Regan Spring 2012 üyesi

CPSU-REGAN-S12S9G45

7 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 1,081