Ana içeriğe geç

Giriş

The fuse is part of the power cable. It burns out under high electrical current to prevent damage to the radio. The power cable should be disconnected from the power source before starting this guide.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

Hiçbir parça belirtilmedi.

  1. Turn the power switch, the leftmost knob, counterclockwise to off. Turn the power switch, the leftmost knob, counterclockwise to off.
    • Turn the power switch, the leftmost knob, counterclockwise to off.

  2. Turn the device around and firmly pull the power cable plug to remove it from the radio. Turn the device around and firmly pull the power cable plug to remove it from the radio.
    • Turn the device around and firmly pull the power cable plug to remove it from the radio.

  3. Simultaneously push the fuse container together and rotate counterclockwise. Simultaneously push the fuse container together and rotate counterclockwise.
    • Simultaneously push the fuse container together and rotate counterclockwise.

  4. Pull the two halves apart.
    • Pull the two halves apart.

  5. Remove the fuse from the case. Remove the fuse from the case.
    • Remove the fuse from the case.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

danperoni

Üyelik tarihi: 18-10-2013

485 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-37, Amido Fall 2013 Cal Poly, Team 11-37, Amido Fall 2013 üyesi

CPSU-AMIDO-F13S11G37

4 Üyeler

9 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 34

Her zaman: 3,893