Eşyalarını Tamir Et Topluluk Mağaza

Cobra SPX 5300 Buttonboard Disassembly

Giriş

This guide will walk you through removing the buttonboard. Removing the buttonboard will give you access to the buttons and the display screen.

Neye ihtiyacın var

  1. Cobra SPX 5300 Buttonboard Disassembly, Windshield Bracket Mount: adım 1, 2 resimden 1. Cobra SPX 5300 Buttonboard Disassembly, Windshield Bracket Mount: adım 1, 2 resimden 2.

    • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

    Düzenle

  2. Cobra SPX 5300 Buttonboard Disassembly: adım 2, 2 resimden 1. Cobra SPX 5300 Buttonboard Disassembly: adım 2, 2 resimden 2.

    • Pull the black plastic back case off of the device.

    Düzenle

  4. Cobra SPX 5300 Buttonboard Disassembly: adım 3, 1 resimden 1.

    • Lift up the motherboard and lay it flat next to the device.

    • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

    Düzenle

  5. Cobra SPX 5300 Buttonboard Disassembly: adım 4, 1 resimden 1.

    • Remove the windshield bracket mount.

    Düzenle

  6. Cobra SPX 5300 Buttonboard Disassembly, Buttonboard: adım 5, 1 resimden 1.

    • Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

    Düzenle

  7. Cobra SPX 5300 Buttonboard Disassembly: adım 6, 1 resimden 1.

    • Lift buttonboard to expose silver button plate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Megan McDonough

Üyelik tarihi: 09/25/15

113 İtibar

1 Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

University of Tampa, Team 1-2, Whiteside Fall 2015 University of Tampa, Team 1-2, Whiteside Fall 2015 üyesi

UT-WHITESIDE-F15S1G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 8

Her zaman: 311