Eşyalarını Tamir Et Topluluk Mağaza

ColecoVision Controller Circuit Board Replacement

Giriş

The purpose of this guide is to show step-by-step instructions on how to replace the circuit board of a ColecoVision game controller.

Neye ihtiyacın var

  1. ColecoVision Controller Circuit Board Replacement, Controller Circuit Board: adım 1, 2 resimden 1. ColecoVision Controller Circuit Board Replacement, Controller Circuit Board: adım 1, 2 resimden 2.

    • Unplug the controller from the game console.

    Düzenle

  2. ColecoVision Controller Circuit Board Replacement: adım 2, 2 resimden 1. ColecoVision Controller Circuit Board Replacement: adım 2, 2 resimden 2.

    • Place the controller with the back panel up (buttons down).

    • Remove the five 15mm screws on the back with a Phillips #1 screwdriver.

    Düzenle

  4. ColecoVision Controller Circuit Board Replacement: adım 3, 1 resimden 1.

    • Turn the device around.

    • Separate the front panel from the rest of the controller and set aside.

    Düzenle

  5. ColecoVision Controller Circuit Board Replacement: adım 4, 2 resimden 1. ColecoVision Controller Circuit Board Replacement: adım 4, 2 resimden 2.

    • Remove the tape and wiring holding the wires in place.

    • Carefully lift the circuit board out of the controller.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Juin Yeh

Üyelik tarihi: 10/17/18

205 İtibar

2 adet Kılavuz yazıldı

Rozetler: 3

Ekip

UW Tacoma, Team S1-G2, Rose Fall 2018 UW Tacoma, Team S1-G2, Rose Fall 2018 üyesi

UWT-ROSE-F18S1G2

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 9

Son 30 gün: 17

Her zaman: 1,001