Eşyalarını Tamir Et Topluluk Mağaza

ColecoVision Motherboard Replacement

Giriş

The purpose of this guide is to give step-by-step instruction on how to replace the motherboard on a ColecoVision.

Neye ihtiyacın var

  1. ColecoVision Motherboard Replacement, Motherboard: adım 1, 1 resimden 1.

    • Start by laying the console face down.

    • Remove the eight 15mm Phillips #1 screws from the bottom of the device.

    Düzenle

  2. ColecoVision Motherboard Replacement: adım 2, 2 resimden 1. ColecoVision Motherboard Replacement: adım 2, 2 resimden 2.

    • Flip the console back over.

    • Lift the front panel off. I would reccomended using a metal spudger along the rim of the top to safely remove it and set it aside.

    Düzenle

  4. ColecoVision Motherboard Replacement: adım 3, 2 resimden 1. ColecoVision Motherboard Replacement: adım 3, 2 resimden 2.

    • Remove the two 15mm Phillips #1 screws holding the casing in place.

    • Carefully lift the casing from the motherboard.

    Düzenle

  5. ColecoVision Motherboard Replacement: adım 4, 1 resimden 1.

    • Remove the center Phillips #1 screw near the cartridge slot.

    • Remove the second Phillips #1 screw near the RAM chips.

    • Carefully lift and remove the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Krystalina

Üyelik tarihi: 10/24/18

121 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

UW Tacoma, Team S1-G2, Rose Fall 2018 UW Tacoma, Team S1-G2, Rose Fall 2018 üyesi

UWT-ROSE-F18S1G2

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 13

Son 30 gün: 33

Her zaman: 1,593