Giriş

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the floppy drive of the Compaq Evo N1000v device.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the 6 screws as shown in the photo.
    • Remove the 6 screws as shown in the photo.

    Yorum Ekle

  2. Push the front of the laptop upwards as the photo shows.
    • Push the front of the laptop upwards as the photo shows.

    Yorum Ekle

    • Rest the front end piece on the keyboard area.

    Yorum Ekle

    • Squeeze and pull up on the left and right sides of the floppy drive cable to unlock it.

    Yorum Ekle

    • Use the tweezers is gently pull the cable from the locking mechanism.

    Yorum Ekle

    • Unscrew the 4 screws as shown in the photo.

    Yorum Ekle

    • Remove the floppy drive.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

ryan

Üyelik tarihi: 12-03-2014

470 İtibar

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 192