Eşyalarını Tamir Et Topluluk Mağaza

Compaq Evo N1000v Palm Rest Replacement

Giriş

Carpal Tunnel Syndrome is one of the worst outcomes that comes from poor wrist placement. Wrist placement that comes from typing on a keyboard, or more specifically, on a laptop keyboard. The purpose of the palm rest is to ensure proper wrist posture, and its purpose is dedicated to ensuring that no lifelong inconveniences come of it.

In this guide, you will be guided step by step in order to properly disassemble and replace the palm rest for a Compaq Evo N1000v.

There is no special skillset required for this fix, besides a slight learning curve that comes with the learning the surface-level intricacies that come with opening up a laptop.

Neye ihtiyacın var

  1. Compaq Evo N1000v Palm Rest Replacement, LED Cover: adım 1, 1 resimden 1.

    • Flip the laptop over with the rear panel facing forward.

    Düzenle

  2. Compaq Evo N1000v Palm Rest Replacement: adım 2, 1 resimden 1.

    • Using a TR8 Torx screwdriver, remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    Düzenle

  3. Compaq Evo N1000v Palm Rest Replacement: adım 3, 1 resimden 1.

    • Flip the laptop back over with the front facing forward. Open the screen.

    Düzenle

  4. Compaq Evo N1000v Palm Rest Replacement: adım 4, 1 resimden 1.

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    Düzenle

  5. Compaq Evo N1000v Palm Rest Replacement: adım 5, 1 resimden 1.

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Düzenle

  6. Compaq Evo N1000v Palm Rest Replacement: adım 6, 1 resimden 1.

    • Locate the Scroll and Pause keys near the top right corner of the keyboard.

    Düzenle

  7. Compaq Evo N1000v Palm Rest Replacement: adım 7, 1 resimden 1.

    • While holding the Scroll and Pause keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Düzenle

  8. Compaq Evo N1000v Palm Rest Replacement: adım 8, 2 resimden 1. Compaq Evo N1000v Palm Rest Replacement: adım 8, 2 resimden 2.

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    Düzenle

  9. Compaq Evo N1000v Palm Rest Replacement, Keyboard: adım 9, 1 resimden 1.

    • Lift the back edge of the keyboard and pull towards the screen.

    Düzenle

  10. Compaq Evo N1000v Palm Rest Replacement: adım 10, 1 resimden 1.

    • Pull the cable and lift up to release.

    Düzenle

  11. Compaq Evo N1000v Palm Rest Replacement: adım 11, 1 resimden 1.

    • Remove the keyboard.

    Düzenle

  12. Compaq Evo N1000v Palm Rest Replacement, Palm Rest: adım 12, 1 resimden 1.

    • Close the laptop and flip it so the rear panel is facing up.

    Düzenle

  13. Compaq Evo N1000v Palm Rest Replacement: adım 13, 1 resimden 1.

    • Using the TR8 Torx screwdriver, remove the six screws from the back case.

    Düzenle

  14. Compaq Evo N1000v Palm Rest Replacement: adım 14, 1 resimden 1.

    • Remove the battery.

    • Remove the screw from the metal support on the case edge with a Torx T8 screwdriver.

    • Flip the laptop over again so the top is facing up.

    • Open the laptop screen and face it towards you.

    Düzenle

  15. Compaq Evo N1000v Palm Rest Replacement: adım 15, 1 resimden 1.

    • Lift the the palm rest up from the front edge of the laptop and swing it towards the screen.

    • Be gentle as it is connected by some cables.

    Düzenle

  16. Compaq Evo N1000v Palm Rest Replacement: adım 16, 1 resimden 1.
    Düzenle

  17. Compaq Evo N1000v Palm Rest Replacement: adım 17, 1 resimden 1.

    • Disconnect the second ribbon cable.

    Düzenle

  18. Compaq Evo N1000v Palm Rest Replacement: adım 18, 1 resimden 1.

    • Remove the palm rest.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

10 tane daha katılımcı ile

Alex Hernandez

Üyelik tarihi: 04/14/10

46 İtibar

4 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 29-74, Johann Spring 2010 Cal Poly, Team 29-74, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S29G74

3 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 3,074