Ana içeriğe geç

Compaq Evo N1000v Top Cover Replacement

Neye ihtiyacın var

  1. Compaq Evo N1000v Top Cover Replacement, LED Cover: adım 1, 1 resimden 1.
    • Flip the laptop over with the rear panel facing forward.

  2. Compaq Evo N1000v Top Cover Replacement: adım 2, 1 resimden 1.
    • Using a TR8 Torx screwdriver, remove the two T8 Torx screws that secure the LED cover to the base enclosure.

  3. Compaq Evo N1000v Top Cover Replacement: adım 3, 1 resimden 1.
    • Flip the laptop back over with the front facing forward. Open the screen.

  4. Compaq Evo N1000v Top Cover Replacement: adım 4, 1 resimden 1.
    • Locate the F1 and F2 keys near the top left corner of the keyboard.

  5. Compaq Evo N1000v Top Cover Replacement: adım 5, 1 resimden 1.
    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  6. Compaq Evo N1000v Top Cover Replacement: adım 6, 1 resimden 1.
    • Locate the Scroll and Pause keys near the top right corner of the keyboard.

  7. Compaq Evo N1000v Top Cover Replacement: adım 7, 1 resimden 1.
    • While holding the Scroll and Pause keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  8. Compaq Evo N1000v Top Cover Replacement: adım 8, 2 resimden 1. Compaq Evo N1000v Top Cover Replacement: adım 8, 2 resimden 2.
    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

  9. Compaq Evo N1000v Top Cover Replacement, Keyboard: adım 9, 1 resimden 1.
    • Lift the back edge of the keyboard and pull towards the screen.

  10. Compaq Evo N1000v Top Cover Replacement: adım 10, 1 resimden 1.
    • Pull the cable and lift up to release.

  11. Compaq Evo N1000v Top Cover Replacement: adım 11, 1 resimden 1.
    • Remove the keyboard.

  12. Compaq Evo N1000v Top Cover Replacement, Heat Sink: adım 12, 1 resimden 1.
    • Disconnect the cable connecting the fan to the system board.

  13. Compaq Evo N1000v Top Cover Replacement: adım 13, 1 resimden 1.
    • Remove the four screws from the heat sink.

  14. Compaq Evo N1000v Top Cover Replacement: adım 14, 1 resimden 1.
    • Pull the the heat sink up and out of the computer.

  15. Compaq Evo N1000v Top Cover Replacement, Palm Rest: adım 15, 1 resimden 1.
    • Close the laptop and flip it so the rear panel is facing up.

  16. Compaq Evo N1000v Top Cover Replacement: adım 16, 1 resimden 1.
    • Using the TR8 Torx screwdriver, remove the six screws from the back case.

  17. Compaq Evo N1000v Top Cover Replacement: adım 17, 1 resimden 1.
    • Remove the battery.

    • Remove the screw from the metal support on the case edge with a Torx T8 screwdriver.

    • Flip the laptop over again so the top is facing up.

    • Open the laptop screen and face it towards you.

  18. Compaq Evo N1000v Top Cover Replacement: adım 18, 1 resimden 1.
    • Lift the the palm rest up from the front edge of the laptop and swing it towards the screen.

    • Be gentle as it is connected by some cables.

  19. Compaq Evo N1000v Top Cover Replacement: adım 20, 1 resimden 1.
    • Disconnect the second ribbon cable.

  20. Compaq Evo N1000v Top Cover Replacement: adım 21, 1 resimden 1.
    • Remove the palm rest.

  21. Compaq Evo N1000v Top Cover Replacement, Top Cover: adım 22, 1 resimden 1.
    • Turn the laptop bottom side up.

  22. Compaq Evo N1000v Top Cover Replacement: adım 23, 1 resimden 1.
    • Remove the two TM 2.5mm x 8.0mm screws that secure the top cover to the base.

  23. Compaq Evo N1000v Top Cover Replacement: adım 24, 1 resimden 1.
    • Turn the base top side up with the front facing forward.

  24. Compaq Evo N1000v Top Cover Replacement: adım 25, 1 resimden 1.
    • Remove the three TM 2.5 mm x 5.0 mm screws that secure the top cover to the base.

  25. Compaq Evo N1000v Top Cover Replacement: adım 26, 1 resimden 1.
    • Lift the top cover straight up about one inch, then slide forward until the microphone cable is exposed.

    • Disconnect the microphone cable from the system board.

  26. Compaq Evo N1000v Top Cover Replacement: adım 27, 1 resimden 1.
    • Remove the top cover from the base.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alex Hernandez

Üyelik tarihi: 04/14/10

46 İtibar

4 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 29-74, Johann Spring 2010 Cal Poly, Team 29-74, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S29G74

3 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 3,065