Ana içeriğe geç

Giriş

If your dryer isn't turning on, the back of the On/Off button that engages the power may be broken.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
    • Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.

  2. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  3. Some pieces may fall out when removing the face of the handle.
    • Some pieces may fall out when removing the face of the handle.

    • Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.

  4. Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in. Once the new switch is in place you can put the dryer back together.
    • Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in.

    • Once the new switch is in place you can put the dryer back together.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Candace

Üyelik tarihi: 23-01-2014

914 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-33, Maness Winter 2014 Cal Poly, Team 10-33, Maness Winter 2014 üyesi

CPSU-MANESS-W14S10G33

3 Üyeler

7 adet Kılavuz yazıldı

2 Yorum

Looks to me that a replacement switch would be required. How can obtain one?

Jaky Felix - Yanıt

“No parts required” is what’s displayed by default when there’s no link to an actual part for sale—it’’s a bit silly and clearly incorrect in this case. For hard-to-find parts, check eBay or Amazon. Also, a lot of folks with multiple broken units use these guides to cobble together one working unit from the parts. Good luck!

Jeff Suovanen -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 12

Her zaman: 1,833