Eşyalarını Tamir Et Topluluk Mağaza

Conair Infiniti PRO Curling Iron Heating Element Replacement

Giriş

This guide will show how to replace the barrel heating element of your Conair Infiniti PRO Curling Iron. It requires the housing, power cord and motherboard to be removed beforehand.

Neye ihtiyacın var

  1. Conair Infiniti PRO Curling Iron Heating Element Replacement, Housing: adım 1, 1 resimden 1.

    • Remove the Philips #1 28 mm.

    • Make sure device is unplugged and cool before attempting to replace parts.

    Düzenle

  2. Conair Infiniti PRO Curling Iron Heating Element Replacement: adım 2, 1 resimden 1.

    • Remove the Philips #1 22 mm screws.

    Düzenle

  3. Conair Infiniti PRO Curling Iron Heating Element Replacement: adım 3, 3 resimden 1. Conair Infiniti PRO Curling Iron Heating Element Replacement: adım 3, 3 resimden 2. Conair Infiniti PRO Curling Iron Heating Element Replacement: adım 3, 3 resimden 3.

    • Pry off the housing using a plastic spudger.

    Düzenle

  5. Conair Infiniti PRO Curling Iron Heating Element Replacement, Power Cord: adım 4, 1 resimden 1.

    • Pull power chord out.

    Düzenle

  6. Conair Infiniti PRO Curling Iron Heating Element Replacement, Motherboard: adım 5, 1 resimden 1.

    • Heat up your soldering gun and desolder the red wire from the motherboard as shown.

    • Note the location of wire attachment.

    Düzenle

  7. Conair Infiniti PRO Curling Iron Heating Element Replacement: adım 6, 1 resimden 1.
    Bu adımda kullanılan alet:
    Desoldering Pump
    $3.99
    Satın Al

    • With your soldering gun, desolder the white wire from the motherboard as shown.

    • Note the location of wire attachment.

    Düzenle

  8. Conair Infiniti PRO Curling Iron Heating Element Replacement: adım 7, 1 resimden 1.

    • Once both wires are desoldered the motherboard can be removed.

    Düzenle

  9. Conair Infiniti PRO Curling Iron Heating Element Replacement, Heating Element: adım 8, 2 resimden 1. Conair Infiniti PRO Curling Iron Heating Element Replacement, Heating Element: adım 8, 2 resimden 2.

    • Remove the heating element mount. This will free up the heating element barrel for replacement.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Jonathon Bruer

Üyelik tarihi: 11/09/17

607 İtibar

5 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

IUPUI, Team S7-G5, Baechle Fall 2017 IUPUI, Team S7-G5, Baechle Fall 2017 üyesi

IUPUI-BAECHLE-F17S7G5

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 22

Her zaman: 1,506