Giriş

If your hair dryer's fan grill is damaged or dirty, this guide will show you how to replace it.

Parçalar

Hiçbir parçaya gerek yok.

Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
  • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

  • Hold the hair dryer by the handle so that the back panel faces up.

Yorum Ekle

Remove the two 15.875 mm Phillips #2 screws from the back panel. Remove the two 15.875 mm Phillips #2 screws from the back panel.
  • Remove the two 15.875 mm Phillips #2 screws from the back panel.

Yorum Ekle

Starting from where the cord attaches to the handle, pull apart the two plastic panels. Continue separating the back panel, working along the seam. With moderate force, completely remove the back panel from the hair dryer.
  • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

  • Continue separating the back panel, working along the seam.

  • With moderate force, completely remove the back panel from the hair dryer.

Yorum Ekle

Hold the hair dryer by the nozzle so that the handle points to the left. Remove the two 1-inch Phillips #2 screws from the back of the fan motor.
  • Hold the hair dryer by the nozzle so that the handle points to the left.

  • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

Yorum Ekle

Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns. Pull on the back of the fan motor to gently lift the motor out of the hair dryer. Lift the attached electrical wiring and heat shield completely out of the hair dryer.
  • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

  • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

  • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

Yorum Ekle

Hold the front panel of the hair dryer by the nozzle facing upward.
  • Hold the front panel of the hair dryer by the nozzle facing upward.

Yorum Ekle

Using your index finger push the fan grill down with moderate force. Using your index finger push the fan grill down with moderate force.
  • Using your index finger push the fan grill down with moderate force.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Timothy Lo

Üyelik tarihi: 22-04-2014

863 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-58, Amido Spring 2014 Cal Poly, Team 10-58, Amido Spring 2014 üyesi

CPSU-AMIDO-S14S10G58

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 18

Her zaman: 477