Ana içeriğe geç

Conduit Attachment

Neye ihtiyacın var

  1. Conduit Attachment, Parts Overview: adım 1, 2 resimden 1. Conduit Attachment, Parts Overview: adım 1, 2 resimden 2.
    • The parts depicted are the attachment pieces you should have (in addition to the conduit)

  2. Conduit Attachment, Cover Piece: adım 2, 3 resimden 1. Conduit Attachment, Cover Piece: adım 2, 3 resimden 2. Conduit Attachment, Cover Piece: adım 2, 3 resimden 3.
    • Pull the cover over the conduit and the wires

  3. Conduit Attachment, Outer Yellow Seal: adım 3, 3 resimden 1. Conduit Attachment, Outer Yellow Seal: adım 3, 3 resimden 2. Conduit Attachment, Outer Yellow Seal: adım 3, 3 resimden 3.
    • Pull the outer yellow seal over the wires and the conduit

    • The end with the ridge should be pulled down first (i.e. that end will be closer to the cover)

  4. Conduit Attachment, The Screw Piece: adım 4, 3 resimden 1. Conduit Attachment, The Screw Piece: adım 4, 3 resimden 2. Conduit Attachment, The Screw Piece: adım 4, 3 resimden 3.
    • Pull this piece over the wires and then screw it into the conduit

  5. Conduit Attachment, Connector Piece: adım 5, 3 resimden 1. Conduit Attachment, Connector Piece: adım 5, 3 resimden 2. Conduit Attachment, Connector Piece: adım 5, 3 resimden 3.
    • Put the connector piece into the node (may have to hold it in place for the subsequent steps)

  6. Conduit Attachment, Inner Yellow Seal: adım 6, 3 resimden 1. Conduit Attachment, Inner Yellow Seal: adım 6, 3 resimden 2. Conduit Attachment, Inner Yellow Seal: adım 6, 3 resimden 3.
    • Pull the yellow seal over the inside of the connector piece

  7. Conduit Attachment, Tightener Piece: adım 7, 3 resimden 1. Conduit Attachment, Tightener Piece: adım 7, 3 resimden 2. Conduit Attachment, Tightener Piece: adım 7, 3 resimden 3.
    • Screw the tightener piece onto the connector

  8. Conduit Attachment, Putting it All Together: adım 8, 3 resimden 1. Conduit Attachment, Putting it All Together: adım 8, 3 resimden 2. Conduit Attachment, Putting it All Together: adım 8, 3 resimden 3.
    • Pull the wires through the connector piece and then screw the conduit onto the connector

  9. Conduit Attachment, Final Overview: adım 9, 1 resimden 1.
    • This is how it should look after everything is connected

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nicholas Jeng

Üyelik tarihi: 01/16/18

529 İtibar

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 29