Eşyalarını Tamir Et Topluluk Mağaza

Craftsman Model 315.10721 Table Guard Replacement

Giriş

The table guard is essential in making sure the Craftsman Model 315.10721 makes the desired cuts. Keep in mind when performing the replacement that disassembling the table guard is time consuming.

Neye ihtiyacın var

  1. Craftsman Model 315.10721 Table Guard Replacement, Table Guard: adım 1, 1 resimden 1.

    • Using a flathead screwdriver, remove the 1/2" flathead screw to allow the table guard to pivot.

    Düzenle

  2. Craftsman Model 315.10721 Table Guard Replacement: adım 2, 1 resimden 1.

    • Pivot the table guard from its upright position to an angle.

    • Using a Phillips #1 screwdriver, remove the 1" Phillips screw and the nut on the opposite side.

    Düzenle

  4. Craftsman Model 315.10721 Table Guard Replacement: adım 3, 1 resimden 1.

    • Using the Phillips #1 screwdriver, remove eight 1" Philips screws from the main case.

    • Carefully remove the main case to expose the inside of the saw.

    Düzenle

  5. Craftsman Model 315.10721 Table Guard Replacement: adım 4, 1 resimden 1.

    • Remove the old table guard by gently lifting it away from the main case.

    • Replace the old table guard with the new one by placing it in the same orientation as the one removed.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Riley Hilliker

Üyelik tarihi: 10/14/14

557 İtibar

5 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team 4-47, Amido Fall 2014 Cal Poly, Team 4-47, Amido Fall 2014 üyesi

CPSU-AMIDO-F14S4G47

4 Üyeler

5 adet Kılavuz yazıldı

2 Yorum

Where can I get a replacement table guard???

Roger Coyle - Yanıt

Where can I get a replacement table guard for this jig saw????????

Roger Coyle - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 594