Ana içeriğe geç

What you need

  1. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement, Bracket Plate of Y-Axis Motor: adım 1, 1 resimden 1.
    • Place the bed plate in the middle of your Ender 3. Do this manually by gently pushing it to the middle.

  2. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 2, 2 resimden 1. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 2, 2 resimden 2.
    • Or alternatively, place the bed in the center by turning your Ender 3 on.

  3. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 3, 3 resimden 1. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 3, 3 resimden 2. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 3, 3 resimden 3.
    • Turn on the printer, and click the button to the screen shown in the photo.

    • Rotate the button clockwise to "Prepare".

    • Rotate the button clockwise to AutoHome. This should set your bedplate to 0 on both X & Y axes.

  4. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 4, 1 resimden 1.
    • Unplug the wire that is connected to the Y motor.

  5. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 5, 1 resimden 1.
    • Remove the two M4*20 screws from the back end of the Y-axis bar using an 8 mm Allen Wrench. The side of the display should be facing you.

  6. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 6, 1 resimden 1.
    • Remove the four M3*6 screws that are attaching the motor to the Y-axis motor using an 8 mm Allen Wrench.

  7. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 7, 1 resimden 1.
    • Buy a new bracket with the same brand (depending on the severity of the bend of the bracket) or straighten the metal on your own.

  8. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 8, 2 resimden 1. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 8, 2 resimden 2.
    • If you choose to fix it on your own, slip the bracket in between a workshop bench clamp. Apply enough pressure between two thick blocks of metal to straighten it.

    • Use vise-grips to aid in stabilizing the metal as you force the metal to straighten.

  9. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 9, 2 resimden 1. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: adım 9, 2 resimden 2.
    • Repeat, Steps 6-11 in reverse to put the bracet back on the Y motor and back on the Ender 3.

    • Turn on Ender 3 to see if you did it correctly. Try to also print something too!

Sonuç

To reassemble your device, follow these instructions in reverse order.

Isabella Bianca Reano

Üyelik tarihi: 18-04-2021

169 İtibar

1 Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 15

Son 30 gün: 73

Her zaman: 935