Giriş

This guide will show you how to remove the front cover of your device. Use this guide to gain access to the button pad and LCD screen.

Parçalar

Hiçbir parçaya gerek yok.

Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.
  • Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.

Yorum Ekle

Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.
  • Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.

Yorum Ekle

Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen. When the cover has been lifted off the screen, use your hands to remove it from the device. The button pad may fall off when the cover is removed.
  • Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.

  • When the cover has been lifted off the screen, use your hands to remove it from the device.

  • The button pad may fall off when the cover is removed.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Gabriele Pregadio

Üyelik tarihi: 17-04-2013

1 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 17-2, Regan Spring 2013 Cal Poly, Team 17-2, Regan Spring 2013 üyesi

CPSU-REGAN-S13S17G2

4 Üyeler

8 adet Kılavuz yazıldı

Bir Yorum

Fantastic but does anyone know where I can get this part?

VegetaFlex4Fitness - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 250