Eşyalarını Tamir Et Topluluk Mağaza

Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement

Giriş

If your Crock-Pot Express Crock Multi-Cooker does not seal properly, use this guide to replace your bobber valve.

Neye ihtiyacın var

  1. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: adım 1, 3 resimden 1. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: adım 1, 3 resimden 2. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: adım 1, 3 resimden 3.

    • Orient the crock pot where the lid locked and unlocked icons are visible.

    • Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other.

    • Remove the lid.

    Düzenle

  3. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Bobber Valve: adım 2, 1 resimden 1.

    • Flip the lid over and expose plastic washer.

    Düzenle

  4. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement: adım 3, 1 resimden 1.

    • Pull the plastic washer off the bobber valve and allow the bobber valve to fall out

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

7 Yorum

Ok I followed your directions but the new valve just keeps calling out?

dpataky1952 - Yanıt

First time I used this but the bobber valve ports steam and does not stop ( unit is brand new )

Archerkc - Yanıt

would be nice to see the other side of this. is it just supposed to be a hole on the outside up top? it is letting out air…when im trying to pressure cook.

shaycooks2 - Yanıt

Ditto I was wanting to know the same thing!

kate2272 -

Ditto. Mine does the same thing.. suggestions?

Tina Royce - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 20

Son 30 gün: 114

Her zaman: 26,368