Ana içeriğe geç

Giriş

This guide will help you replace the selection knob of the Cuisinart DCC-1100. Please have a replacement knob ready and unplug the machine before beginning work.

  1. Remove the coffee pot. Remove the coffee pot.
    • Remove the coffee pot.

  2. Open the lid. Remove the two 1.6mm Phillips #1 screws from the lid.
    • Open the lid.

    • Remove the two 1.6mm Phillips #1 screws from the lid.

  3. Remove the lid from the coffee maker.
    • Remove the lid from the coffee maker.

  4. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  5. Remove the two 1.3mm screws from the display.
    • Remove the two 1.3mm screws from the display.

  6. Push the display into the maker so that way you can access the screws in the back. Remove the four 1mm Phillips #0 screws from the back.
    • Push the display into the maker so that way you can access the screws in the back.

    • Remove the four 1mm Phillips #0 screws from the back.

  7. Remove the back panel. Remove the front panel from the display.
    • Remove the back panel.

    • Remove the front panel from the display.

  8. Remove the three 1mm Phillips #0 screws from the knob.
    • Remove the three 1mm Phillips #0 screws from the knob.

  9. Remove the knob from the front panel.
    • Remove the knob from the front panel.

  10. Remove the plastic ring from the knob.
    • Remove the plastic ring from the knob.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Josh Harvey

Üyelik tarihi: 25-01-2018

673 İtibar

4 adet Kılavuz yazıldı

Takım

USF Tampa, Team S20-G4, Passmore Spring 2018 USF Tampa, Team S20-G4, Passmore Spring 2018 üyesi

USFT-PASSMORE-S18S20G4

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 5

Son 30 Gün: 13

Her zaman: 175