Eşyalarını Tamir Et Topluluk Mağaza

Cuisinart DLC-8F Safety Switch Replacement

Giriş

This guide teaches the user how to replace the safety switch in your Cuisinart DLC-8F. The removal of the safety switch first requires the removal of the bottom hood and all of this can be done with just a Phillips #2 screwdriver. This is an easy process and should only take about 10 minutes.

Neye ihtiyacın var

  1. Cuisinart DLC-8F Safety Switch Replacement, Safety Switch: adım 1, 2 resimden 1. Cuisinart DLC-8F Safety Switch Replacement, Safety Switch: adım 1, 2 resimden 2.

    • Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.

    Düzenle

  2. Cuisinart DLC-8F Safety Switch Replacement: adım 2, 2 resimden 1. Cuisinart DLC-8F Safety Switch Replacement: adım 2, 2 resimden 2.

    • Gently lift the bottom cover from the main body.

    Düzenle

  4. Cuisinart DLC-8F Safety Switch Replacement: adım 3, 2 resimden 1. Cuisinart DLC-8F Safety Switch Replacement: adım 3, 2 resimden 2.

    • Remove the two 14 mm Phillips #2 screws holding in the safety switch bracket.

    Düzenle

  5. Cuisinart DLC-8F Safety Switch Replacement: adım 4, 2 resimden 1. Cuisinart DLC-8F Safety Switch Replacement: adım 4, 2 resimden 2.

    • Pull out the safety switch bracket with your hand.

    Düzenle

  6. Cuisinart DLC-8F Safety Switch Replacement: adım 5, 2 resimden 1. Cuisinart DLC-8F Safety Switch Replacement: adım 5, 2 resimden 2.

    • Remove the two 19 mm Phillips #2 screws holding the safety switch in the bracket.

    Düzenle

  7. Cuisinart DLC-8F Safety Switch Replacement: adım 6, 3 resimden 1. Cuisinart DLC-8F Safety Switch Replacement: adım 6, 3 resimden 2. Cuisinart DLC-8F Safety Switch Replacement: adım 6, 3 resimden 3.

    • Pull off the three wires on the safety switch with your hand by firmly grabbing the wires at the base.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

David Colman

Üyelik tarihi: 01/25/17

573 İtibar

4 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 8-6, Banghart Winter 2017 Cal Poly, Team 8-6, Banghart Winter 2017 üyesi

CPSU-BANGHART-W17S8G6

4 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

how do you overrid the safty switch? What wires do you connect?

Roger Nelson - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 13

Her zaman: 627