Eşyalarını Tamir Et Topluluk Mağaza

Cuisinart Mini-Prep DLC-2A Motor Replacement

Giriş

This guide will lead you through the process of replacing a dead or dying motor in your Cuisinart Mini-Prep DLC-2A.

Neye ihtiyacın var

  1. Cuisinart Mini-Prep DLC-2A Motor Replacement, Cuisinart Mini-Prep DLC-2A Case Disassembly: adım 1, 2 resimden 1. Cuisinart Mini-Prep DLC-2A Motor Replacement, Cuisinart Mini-Prep DLC-2A Case Disassembly: adım 1, 2 resimden 2.

    • Remove the back panel using a Phillips #1 Screwdriver on the four screws that hold it in place.

    Düzenle

  2. Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: adım 2, 3 resimden 1. Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: adım 2, 3 resimden 2. Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: adım 2, 3 resimden 3.

    • Remove the three screws that hold the motor to the top case using a Phillips #1 screwdriver.

    Düzenle

  4. Cuisinart Mini-Prep DLC-2A Motor Replacement: adım 3, 3 resimden 1. Cuisinart Mini-Prep DLC-2A Motor Replacement: adım 3, 3 resimden 2. Cuisinart Mini-Prep DLC-2A Motor Replacement: adım 3, 3 resimden 3.

    • Pull out the metal piece from the casing.

    • Pull apart the plastic casing that contains the rod.

    • Take off the plastic gears.

    Düzenle

  5. Cuisinart Mini-Prep DLC-2A Motor Replacement: adım 4, 2 resimden 1. Cuisinart Mini-Prep DLC-2A Motor Replacement: adım 4, 2 resimden 2.

    • Use the Phillips #1 screwdriver to take off the screws that hold the white plastic to the metal piece.

    • Pull apart the white plastic from the metal piece.

    Düzenle

  6. Cuisinart Mini-Prep DLC-2A Motor Replacement: adım 5, 1 resimden 1.

    • Use an electric screwdriver with a Phillips #1 head to take off the top metal piece.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 681