Eşyalarını Tamir Et Topluluk Mağaza

CyberPower UPS Battery Replacement

Giriş

This guide will instruct you on replacing the battery on the Cyberpower Model# 1000PFCLCD UPS battery backup unit.

Neye ihtiyacın var

  1. CyberPower UPS Battery Replacement, Battery: adım 1, 2 resimden 1. CyberPower UPS Battery Replacement, Battery: adım 1, 2 resimden 2.

    • Power down the unit by pressing the power button until the display goes black.

    • This is usually about 3 seconds.

    • Unplug the power cord from the wall outlet.

    Düzenle

  2. CyberPower UPS Battery Replacement: adım 2, 3 resimden 1. CyberPower UPS Battery Replacement: adım 2, 3 resimden 2. CyberPower UPS Battery Replacement: adım 2, 3 resimden 3.

    • Remove the battery plate cover at the bottom of the UPS using a Phillips #1 screwdriver.

    • If the screwdriver is not magnetized, tap on the cover plate to completely remove the screw.

    Düzenle

  3. CyberPower UPS Battery Replacement: adım 3, 2 resimden 1. CyberPower UPS Battery Replacement: adım 3, 2 resimden 2.

    • Slide the battery cover plate to the left.

    • Grasp the battery plate cover and lift it off the the UPS.

    Düzenle

  5. CyberPower UPS Battery Replacement: adım 4, 3 resimden 1. CyberPower UPS Battery Replacement: adım 4, 3 resimden 2. CyberPower UPS Battery Replacement: adım 4, 3 resimden 3.

    • Pull out the battery to expose the terminal connectors.

    • Use needlenose pliers to disconnect both battery terminal connectors.

    • Do not pull the connectors by the wires, pull connectors by grabbing the connector itself.

    • With the battery terminal connectors disconnected, slide the battery all the way out.

    Düzenle

  6. CyberPower UPS Battery Replacement: adım 5, 3 resimden 1. CyberPower UPS Battery Replacement: adım 5, 3 resimden 2. CyberPower UPS Battery Replacement: adım 5, 3 resimden 3.

    • The replacement battery should be a 12 volt, 9 amp-hour, sealed lead acid battery with f2 type connectors.

    • Install the new battery and reconnect the terminals.

    Düzenle

  7. CyberPower UPS Battery Replacement: adım 6, 3 resimden 1. CyberPower UPS Battery Replacement: adım 6, 3 resimden 2. CyberPower UPS Battery Replacement: adım 6, 3 resimden 3.

    • Slide the battery cover plate to the left.

    • Insert the screw to secure the battery cover plate.

    • Tighten the screw with a Phillips #1 screwdriver.

    Düzenle

  8. CyberPower UPS Battery Replacement: adım 7, 3 resimden 1. CyberPower UPS Battery Replacement: adım 7, 3 resimden 2. CyberPower UPS Battery Replacement: adım 7, 3 resimden 3.

    • Plug system into the wall outlet.

    • Press the power button to turn on the unit.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 52

Son 30 gün: 295

Her zaman: 12,469