Ana içeriğe geç

Giriş

The case of the keyboard is plastic and can break. This guide will show how to replace the case of the keyboard.

  1. Be sure to unplug the keyboard before starting the disassembly. Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.
    • Be sure to unplug the keyboard before starting the disassembly.

    • Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.

  2. Remove the sixteen 5 mm length screws using the Phillips head #2. One of the screws may be located underneath a manufacturer's sticker.
    • Remove the sixteen 5 mm length screws using the Phillips head #2.

    • One of the screws may be located underneath a manufacturer's sticker.

  3. Lift up and remove the plastic casing.
    • Lift up and remove the plastic casing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Braydon Lantz

Üyelik tarihi: 12-02-2018

193 İtibar

2 adet Kılavuz yazıldı

Takım

USF Tampa, Team S15-G2, Boczar Spring 2018 USF Tampa, Team S15-G2, Boczar Spring 2018 üyesi

USFT-BOCZAR-S18S15G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 2

Her zaman: 135