Giriş

Use this guide to assist with general disassembly or troubleshooting of your braille display.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the four bottom screws with a Phillips #00 screwdriver.
    • Remove the four bottom screws with a Phillips #00 screwdriver.

    Yorum Ekle

  2. Remove the plastic cover, paper and chipset.
    • Remove the plastic cover, paper and chipset.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the two screws with a Phillips #00 screwdriver on the logic board.

    • take out the main circuit like show in the picture

    Yorum Ekle

    • Remove the four screws with a Phillips #00 screwdriver.

    Yorum Ekle

    • Remove the connector delicately.

    Yorum Ekle

    • when you put it back together make sure mechanical cells are connected correctly

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sisyphe

Üyelik tarihi: 29-07-2013

332 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 8

Her zaman: 474