Eşyalarını Tamir Et Topluluk Mağaza

DBPOWER T20 Fan Replacement

Giriş

Taking out the fan is quick and easy. When removing the fan it is okay to use some force as it's not delicate.

Neye ihtiyacın var

  1. DBPOWER T20 Fan Replacement, DBPOWER T20 Disassembly: adım 1, 1 resimden 1.

    • Flip the device and lay flat.

    Düzenle

  2. DBPOWER T20 Fan Replacement: adım 2, 1 resimden 1.

    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

    Düzenle

  3. DBPOWER T20 Fan Replacement: adım 3, 3 resimden 1. DBPOWER T20 Fan Replacement: adım 3, 3 resimden 2. DBPOWER T20 Fan Replacement: adım 3, 3 resimden 3.

    • Flip the device over and pry the top off with a plastic opening tool.

    Düzenle

  4. DBPOWER T20 Fan Replacement: adım 4, 1 resimden 1.

    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

    Düzenle

  6. DBPOWER T20 Fan Replacement: adım 5, 2 resimden 1. DBPOWER T20 Fan Replacement: adım 5, 2 resimden 2.

    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

    Düzenle

  7. DBPOWER T20 Fan Replacement: adım 6, 3 resimden 1. DBPOWER T20 Fan Replacement: adım 6, 3 resimden 2. DBPOWER T20 Fan Replacement: adım 6, 3 resimden 3.

    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

    Düzenle

  8. DBPOWER T20 Fan Replacement: adım 7, 2 resimden 1. DBPOWER T20 Fan Replacement: adım 7, 2 resimden 2.

    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

    Düzenle

  9. DBPOWER T20 Fan Replacement: adım 8, 1 resimden 1.

    • Raise motherboard by lifting sideways and then up to avoid the ports.

    Düzenle

  10. DBPOWER T20 Fan Replacement: adım 9, 2 resimden 1. DBPOWER T20 Fan Replacement: adım 9, 2 resimden 2.

    • Remove wires attaching the piezoelectric speakers to the motherboard.

    Düzenle

  11. DBPOWER T20 Fan Replacement: adım 10, 2 resimden 1. DBPOWER T20 Fan Replacement: adım 10, 2 resimden 2.

    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

    Düzenle

  12. DBPOWER T20 Fan Replacement, Fan: adım 11, 2 resimden 1. DBPOWER T20 Fan Replacement, Fan: adım 11, 2 resimden 2.

    • Pull the fan up and out of the housing.

    • In this image the lamp and power input have been removed to increase visibility, you do not have to remove these to remove the fan.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

7 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Sebastian Alvarez de Araya

Üyelik tarihi: 02/15/18

277 İtibar

1 Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

USF Tampa, Team S16-G2, Boczar Spring 2018 USF Tampa, Team S16-G2, Boczar Spring 2018 üyesi

USFT-BOCZAR-S18S16G2

5 Üyeler

5 adet Kılavuz yazıldı

2Kılavuz Yorumları

Any idea of the specifications of the fan? 12v, 24v? I want to change it for another more quiet… but not sure about its voltage. It is 50x50x20mm right? Thanks!

Agustín Castiñeira Fernández - Yanıt

Hola! También querria sustituirlo por otro más silencioso. ¿Alguna idea de sus especificaciones?

Joan Abrines - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 1,176