Giriş
Hi everyone, In this guide, I'll show you how to disassemble to replace the main parts of the DJI Mini 3 Pro drone.
Additional Information
After replacing the drone's GPS module, you will need to calibrate the drone in the DJI Fly mobile app.
To replace the ESC board and drone arms, you will need a soldering iron.
After replacing the motherboard, you will need to calibrate the gimbal camera.
Use this manual to calibrate the gimbal camera https://youtu.be/mu03HWXplM4
Neye ihtiyacın var
Video talimatları
To reassemble your device, follow these instructions.
İptal et: Bu kılavuzu tamamlamadım.
7 farklı kişi bu kılavuzu tamamladı.
1Rehber Yorum
Wie kann ich die Heißklebestellen "materialschonend" lösen? Ich trau mich da nicht mit dem Heißluftgeläse ran.
Woifi - Yanıt