/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap
Dünyanın en büyük onarım topluluğuna katılın
DJI Phantom 4 Advanced Remote Controller Back Panel Replacement

DJI Phantom 4 Advanced Remote Controller Back Panel Replacement

cade knott

cade knott ve 9 diğer katkıda bulunanlar

En son May 7, 2024 tarihinde güncellendi

5 dakika
Orta
İşlem Görüntüleri

Giriş

1. adıma git

Use this guide to replace the back con board of a DJI Phantom 4 Advanced Remote Controller.

With step by step detailed instructions, you will be able to safely resolve issues that may arise with the back con board.

Neye ihtiyacın var

Parçalar

Aletler

Daha fazlasını göster…

  1. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement, Back Panel: adım 1, 1 resimden 1.

    • Remove the four screws with a Torx T8 screwdriver to access the back con board.

    Düzenle

  2. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 2, 2 resimden 1. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 2, 2 resimden 2.

    • Remove three screws using a Phillips #00 screwdriver.

    Düzenle

  4. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 3, 2 resimden 1. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 3, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Sepete Ekle

    • With tweezers, gently remove the large con board tab.

    • Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

    Düzenle

  5. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 4, 2 resimden 1. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 4, 2 resimden 2.

    • Peel off the rubber grips to access the screw holes.

    • Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.

    • Remove the back board and set it aside.

    Düzenle

  6. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 5, 2 resimden 1. DJI Phantom 4 Advanced Remote Controller Back Panel Replacement: adım 5, 2 resimden 2.

    • Pull apart the back plastic panel.

    • Recommended tool for this would be the metal spudger, but not required.

    • Once the back panel is off, you will have access to the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 808