Eşyalarını Tamir Et Topluluk Mağaza

DOSS SoundBox Base-plate Removal Replacement

Neye ihtiyacın var

  1. DOSS SoundBox Base-plate Removal Replacement, Base-plate Removal: adım 1, 3 resimden 1. DOSS SoundBox Base-plate Removal Replacement, Base-plate Removal: adım 1, 3 resimden 2. DOSS SoundBox Base-plate Removal Replacement, Base-plate Removal: adım 1, 3 resimden 3.

    • Locate the four 3/32" screws on the bottom of your device.

    • Using a JIS #00 screwdriver, remove the four 3/32" screws.

    • After removing the screws, lift the cover off of the device.

    Düzenle

  2. DOSS SoundBox Base-plate Removal Replacement: adım 2, 1 resimden 1.

    • Using a JIS #1 screwdriver, remove the six 3/32" screws that attach the base-plate to the speaker enclosure. These screws are marked with red circles.

    • Using a JIS #000 screwdriver, remove the two 1/16" screws from the areas marked with an orange circle.

    • Having the magnetic pad handy will be beneficial, as these screws are very small and easily lost.

    Düzenle

  3. DOSS SoundBox Base-plate Removal Replacement: adım 3, 1 resimden 1.

    • Lift the base-plate off of the enclosure.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 9

Son 30 gün: 18

Her zaman: 1,908