Eşyalarını Tamir Et Topluluk Mağaza

DeWALT Hammer Drill DW511 Chuck Replacement

Neye ihtiyacın var

  1. DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: adım 1, 3 resimden 1. DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: adım 1, 3 resimden 2. DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: adım 1, 3 resimden 3.

    • Remove two 45 mm T20 Torx screws.

    • Remove one 30 mm T20 Torx screw.

    Düzenle

  2. DeWALT Hammer Drill DW511 Chuck Replacement: adım 2, 1 resimden 1.

    • Pull off the top case and set it aside.

    Düzenle

  4. DeWALT Hammer Drill DW511 Chuck Replacement: adım 3, 3 resimden 1. DeWALT Hammer Drill DW511 Chuck Replacement: adım 3, 3 resimden 2. DeWALT Hammer Drill DW511 Chuck Replacement: adım 3, 3 resimden 3.

    • Grab the gear case cover and gently pull it out just enough to where it exposes the lever assembly.

    • It is important that the brushes are removed before you do this step or you may damage your brushes.

    • The lever assembly can now be lifted out.

    Düzenle

  5. DeWALT Hammer Drill DW511 Chuck Replacement: adım 4, 1 resimden 1.

    • With the old lever assembly removed you can now replace it with a new one.

    Düzenle

  6. DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: adım 5, 3 resimden 1. DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: adım 5, 3 resimden 2. DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: adım 5, 3 resimden 3.

    • Gently separate the chuck and plastic housing from the hammer drill body.

    • The removal of the screw from the chuck to separate the plastic housing requires hand strength and specialized tools.

    • The plastic housing is prone to damage if excessive force is applied during the replacement.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 605