Eşyalarını Tamir Et Topluluk Mağaza

DeWalt D26451 Power Cord Replacement

Giriş

The power cord is the DeWalt D26451's source of energy. It is made for double insulated tools. It is a two-wire cord with two prongs and does not need a ground wire.

The power cord may become ripped or damaged and need to be replaced. In this repair guide we will be teaching you how to replace the cord. You can purchase a replacement power cord here.

Neye ihtiyacın var

  1. DeWalt D26451 Power Cord Replacement, Power Cord: adım 1, 1 resimden 1.

    • Please wear safety glasses while completing this guide.

    • Remove screws (3) from cap by using the T20 torx attachment and unscrewing in a leftward motion.

    Düzenle

  2. DeWalt D26451 Power Cord Replacement: adım 2, 1 resimden 1.

    • Gently pry the cap off using your fingers or spudger tool.

    Düzenle

  4. DeWalt D26451 Power Cord Replacement: adım 3, 1 resimden 1.

    • Once cap is off, expose and locate the power cord mounting bracket and remove the 2 screws holding the wire down by using the T15 torx attachment. Once the cord is loose, pull the connectors out

    Düzenle

  5. DeWalt D26451 Power Cord Replacement: adım 4, 1 resimden 1.

    • Loosen the white and black wire terminals

    Düzenle

  6. DeWalt D26451 Power Cord Replacement: adım 5, 1 resimden 1.

    • Insert new power cord terminals and tighten down

    • Do not over-tighten

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 19

Her zaman: 1,301