Eşyalarını Tamir Et Topluluk Mağaza

DeWalt DC970 Forward/Reverse switch Replacement

Giriş

This guide will teach you how to properly replace your forward/reverse switch for this device.

Neye ihtiyacın var

  1. DeWalt DC970 Forward/Reverse switch Replacement, Battery: adım 1, 1 resimden 1.

    • Compress the buttons on either side of the battery and lift the drill away from battery.

    Düzenle

  2. DeWalt DC970 Forward/Reverse switch Replacement: adım 2, 1 resimden 1.

    • Remove battery from drill.

    Düzenle

  4. DeWalt DC970 Forward/Reverse switch Replacement, Drill Assembly: adım 3, 2 resimden 1. DeWalt DC970 Forward/Reverse switch Replacement, Drill Assembly: adım 3, 2 resimden 2.

    • Remove the eight 16 mm, Torx Security #15 screws.

    Düzenle

  5. DeWalt DC970 Forward/Reverse switch Replacement: adım 4, 1 resimden 1.

    • Lay the drill on its side and gently lift the top half off it.

    Düzenle

  6. DeWalt DC970 Forward/Reverse switch Replacement, Forward/Reverse switch: adım 5, 1 resimden 1.

    • Remove the drill mechanism from the shell.

    Düzenle

  7. DeWalt DC970 Forward/Reverse switch Replacement: adım 6, 2 resimden 1. DeWalt DC970 Forward/Reverse switch Replacement: adım 6, 2 resimden 2.

    • Disconnect the forward/reverse switch from the trigger by pulling the mechanism out and leaving the switch in the frame.

    • To replace just pull the switch out and put the new one in the opening.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

jake

Üyelik tarihi: 03/10/16

303 İtibar

2 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

UMass Dartmouth, Team 4-2, Catania Spring 2016 UMass Dartmouth, Team 4-2, Catania Spring 2016 üyesi

UMASSD-CATANIA-S16S4G2

3 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 16

Her zaman: 2,469