Eşyalarını Tamir Et Topluluk Mağaza

DeWalt DCS380 Blade Release lever Replacement

Giriş

This guide will show how to remove the blade release lever and replace it.

Neye ihtiyacın var

  1. DeWalt DCS380 Blade Release lever Replacement, Removing shoe and boot.: adım 1, 1 resimden 1.

    • Remove the battery before disassembly.

    • Remove the shoe by pressing the yellow button on the left side of the hand grip.

    Düzenle

  2. DeWalt DCS380 Blade Release lever Replacement: adım 2, 2 resimden 1. DeWalt DCS380 Blade Release lever Replacement: adım 2, 2 resimden 2.

    • Remove the two M8x18mm T20 bolts from the front plate.

    Düzenle

  4. DeWalt DCS380 Blade Release lever Replacement: adım 3, 1 resimden 1.

    • Pull the front of the grip while holding the saw body in place.

    Düzenle

  5. DeWalt DCS380 Blade Release lever Replacement, Blade Release lever: adım 4, 2 resimden 1. DeWalt DCS380 Blade Release lever Replacement, Blade Release lever: adım 4, 2 resimden 2.

    • Fold the lever all the way back and push it out of the boot.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 16

Her zaman: 685