Ana içeriğe geç

DeWalt DW235G Drill Power Cord Replacement

Neye ihtiyacın var

  1. DeWalt DW235G Drill Power Cord Replacement, Handle Cover: adım 1, 1 resimden 1.
    • Remove the three screws with a Tr20 hex bit screwdriver.

    • Remove the back cover.

  2. DeWalt DW235G Drill Power Cord Replacement, Power Cord: adım 2, 1 resimden 1.
    • Unscrew the Tr20 Hex Screw connecting the green wire to the power cord.

    • Ensure the power drill is unplugged before disconnecting wires.

  3. DeWalt DW235G Drill Power Cord Replacement: adım 3, 2 resimden 1. DeWalt DW235G Drill Power Cord Replacement: adım 3, 2 resimden 2.
    • Disconnect all the wires connected from the trigger box and power cord to the drill motor by pulling on the connectors.

    • There will be 5 wires to disconnect: 2 black, a white, a red, and a blue wire. Remember the locations of where they were connected so you can reconnect them later.

  4. DeWalt DW235G Drill Power Cord Replacement: adım 4, 1 resimden 1.
    • Remove the trigger box and power cord from the main chassis.

  5. DeWalt DW235G Drill Power Cord Replacement: adım 5, 1 resimden 1.
    • Disconnect the wires connecting the power cord to the trigger box by pressing on the clips with a spudger tool.

    • There will be 3 wires to disconnect: A black, white, and green wire. Remember what color attaches to each connector on the trigger box.

    • For reassembly, insert the wires back into the trigger box until a click is heard.

Sonuç

The power cord will now be disconnect and you can replace it with a new one.

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

rpittana

Üyelik tarihi: 09/12/23

275 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 73

Son 30 gün: 263

Her zaman: 1,967