Eşyalarını Tamir Et Topluluk Mağaza

DeWalt DW920 Lock Switch Replacement

Neye ihtiyacın var

  1. DeWalt DW920 Lock Switch Replacement, Disassembly: adım 1, 1 resimden 1.

    • Using an H-5.0 bit driver remove the four T-10 Torx screws.

    Düzenle

  2. DeWalt DW920 Lock Switch Replacement: adım 2, 1 resimden 1.

    • Use 2 H-5.0 bit drivers to take out the main bolt and head.

    • There will be blue locktite on the tread.

    Düzenle

  4. DeWalt DW920 Lock Switch Replacement: adım 3, 1 resimden 1.

    • Carefully remove the two halves of the handle.

    Düzenle

  5. DeWalt DW920 Lock Switch Replacement, Lock Switch: adım 4, 1 resimden 1.

    • Locate the switch on the top of the drill right before the bending joint.

    Düzenle

  6. DeWalt DW920 Lock Switch Replacement: adım 5, 2 resimden 1. DeWalt DW920 Lock Switch Replacement: adım 5, 2 resimden 2.

    • Firmly grasp the switch with two fingers and lift it straight up. The spring should remain attached to the switch during this process.

    • It should lift right out. If it is caught on anything do not force it out.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Stephen Rada

Üyelik tarihi: 03/11/16

433 İtibar

4 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

UMass Dartmouth, Team 8-2, Botvin Spring 2016 UMass Dartmouth, Team 8-2, Botvin Spring 2016 üyesi

UMASSD-BOTVIN-S16S8G2

2 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

This guide was descriptive and easy to follow. Good job!

DankMemerino - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 260