Giriş
This guide will show you how to replace the black air filter cap located on the top of the motor.
Neye ihtiyacın var
-
-
Using a T-20 hex head screw, unscrew the two screws located at the top and bottom of the black air filter. The screws are directly above and below the yellow lettering.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
Cal Poly, Team 8-2, Banghart Winter 2017 Cal Poly, Team 8-2, Banghart Winter 2017 üyesi
CPSU-BANGHART-W17S8G2
3 Üyeler
5 adet Kılavuz yazıldı
