Eşyalarını Tamir Et Topluluk Mağaza

DeWalt DW936 Plastic Cover Replacement

Giriş

This guide will show you how to take off the plastic cover on the saw, so you can get to the inside components.

Neye ihtiyacın var

  1. DeWalt DW936 Plastic Cover Replacement, Plastic Cover: adım 1, 1 resimden 1.

    • Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.

    Düzenle

  2. DeWalt DW936 Plastic Cover Replacement: adım 2, 1 resimden 1.

    • Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.

    Düzenle

  4. DeWalt DW936 Plastic Cover Replacement: adım 3, 1 resimden 1.

    • Remove Allen Key.

    Düzenle

  5. DeWalt DW936 Plastic Cover Replacement: adım 4, 1 resimden 1.

    • Unscrew the black plastic knob underneath the trigger.

    Düzenle

  6. DeWalt DW936 Plastic Cover Replacement: adım 5, 1 resimden 1.

    • Grab hold of the black air filter portion and pull off.

    Düzenle

  7. DeWalt DW936 Plastic Cover Replacement: adım 6, 1 resimden 1.

    • This is what the inside of the saw looks like.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Scott Weinhardt

Üyelik tarihi: 01/25/17

603 İtibar

5 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 8-2, Banghart Winter 2017 Cal Poly, Team 8-2, Banghart Winter 2017 üyesi

CPSU-BANGHART-W17S8G2

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 363